View our laminate installation video's for QuickLock and Original Click below.

VIDEO 1 - INTRODUCTION

This video shows you how to calculate how much flooring you will need, details regarding which direction to install your flooring, outlines which molding you will require for your application and goes over the tools that you will need to get the job done.

VIDEO 2 - PREPARATION

This video shows you how to prepare the subfloor from checking the eveness and moisture content of the subfloor, to installing a vapour barrier and foam underlay. Laminate is not suitable for bathrooms, saunas, rooms with damp concrete, rooms with floor drains or rooms that could potenially flood.

VIDEO 3A - QUICKLOCK DROP & GO INSTALLATION

This video shows you how easy it is to install our QuickLock end to end, drop and go laminate flooring - no need to use a tapping block and pull bar. Tilt and push together the long side of the plank and drop and lock the short side.

VIDEO 3B - ORIGINAL CLICK INSTALLATION

This video shows you how to install our original click laminate flooring. The long side of the plank tilts and pushes together and the short side taps together.

VIDEO 4 - TRANSITIONS AND MOLDINGS

This video shows you how to install the u-track, reducer, t-moulding or stair nosing for each application and to finish off the perimeter of the room using quarter round molding.

VIDEO 5 - MAINTENANCE & CLEANING

This video shows you how to clean and maintain your laminate flooring.